Ampeg GV-22 repair for Mumford and Sons
Recent repair of an Ampeg GV-22 combo belonging to Winston Marshall of Mumford and Sons. Needed quite a bit of […]
Tag: repair
JCM800 PPIMV mod
One of our regular customers came to us for the PPIMV mod on this lovely sounding dual channel JCM800 to […]
Marshall JCM2000 TSL100 amplifier repair
This poorly TSL100 came to us with some quite worn valves. After replacing all the valves and some quite extensive […]
Victoria 35310 amp repair
Check out this lovely amp made by Victoria. It’s a Bandmaster clone and sounds lovely to boot. Valve swap, re-bias, […]
Peavey Tour 700 Bass Amp Repair
Peavey Tour 700 Bass Amp Repair – suffered quite a catastrophic failure during a gig causing a number of isolated […]
Leslie 147 amplifier repair
This Leslie 147 amplifier module belongs to local composer and sound engineer Guy Meredith. It’s normally hooked up to a […]
Marshall JCM900 guitar amp repair
On the bench today we had a classic 50W JCM900. It suddenly stopped working in a gig whilst still turned […]
Studiospares EQ231 graphic equaliser repair
We’ve done a lot of work for Chris Ross now and this is one of his graphic equalisers that just […]
Fender Passport PA system repair
Fortunately there wasn’t much wrong with this little PA system other a few scratchy pots. A general service cured all […]
AKG N-Solidtube valve microphone repair
One of our regular customers, Robin Tunnell came to us with this AKG Solidtube valve microphone which suddenly stopped powering […]